Fusion Firearms barrel saga!

I got a response today. This is the response:

Hello Sir,

They are press punched in all you need to do if you want to remove it is punch it out from right to left so if you have it up on your gunsmithing block make sure the engraving is facing up and punch down it should come out. If you need the hole reamed out on both sides just let me know you can send it back and we can ream both holes.

Thanks again let me know if you need anything else
Tyler Serva
Fusion Firearms



This is my reply:

I’m afraid not. I already tried it from both sides, the right side first, and it will not move at all.

Lest you think that I’m just a dumb amateur, I worked for a master gunsmith in Virginia for a year in the late 80s when I got out of the Navy while waiting for my wife’s enlistment to end. I then attended Trinidad Gunsmithing school. I know how to install and remove a link pin in a 1911 barrel. A link pin should not be this tight. I should not have to be gunsmithing this barrel just to install a link pin. The description of this barrel is:

“Designed for easy drop-in installation for hassle-free use”

So far the 2 you have sent me have been anything but. The 2 barrels you’ve sent me so far have not been what I paid for. I’m willing to give y’all one more chance. Send me a return label like last time and I will send it back. Please inspect the next replacement and make sure it is completely in spec and that a standard link pin will fit in and out as it should. I’m not asking for a pin as I have my own.

Thank you for responding to me and handling my problems personally!

Terry

Now we wait. I do believe that they will do the right thing.

I don’t like his tone- sounds condescending and smarmy. I hope they make it right. Perhaps faced with someone who actually knows, they will be more careful.